概况介绍
Sanitary Bag Dump Station with Glovebox
This Sanitary Bag Dump Station with Glovebox is designed to allow bags or small sacks to be opened and dumped into a process in a closed environment. The Bag Dump Station protects the operator from contact with potentially hazardous bulk materials while also protecting the bulk material from contamination or interaction with the outside environment.
- Function and Operation
- Design
- Technical Data
- Options
- Application
-
- 商品名称: Sanitary Bag Dump Station with Glovebox
- 商品编号: 1440651051596926976
This Sanitary Bag Dump Station with Glovebox is designed to allow bags or small sacks to be opened and dumped into a process in a closed environment. The Bag Dump Station protects the operator from contact with potentially hazardous bulk materials while also protecting the bulk material from contamination or interaction with the outside environment.
The central exhaust ventilation is always on during use to ensure that dust does not exit the unit during loading and/or discharging. The fan is started automatically when the sliding hatch is opened and generates a slight vacuum. Once the hatch is closed the breaker (vent) valve in the exhaust line is activated, blowing a stream of air over the front window to ensure dust does not settle on the window.
The primary filter is only cleaned when the hatch is closed, and the exhaust fan is on. A protective panel prevents dust from being blown at the front window. The empty bag can be disposed of through a flange at the side of the unit.Download Product Specification Sheets
Bag dump station with glove box
Didn’t find what you were looking for?
-
Holding Capacity
• Approx. 150 dm3 [5.3 ft3]
Maximum Bag Dimensions
• 400 x 500 x 150 mm [16 x 20 x 6 in] (width x height x depth).
• Access hatch opening: 470 x 180 mm [18.5 x 7.1 in] (width x height)Controls
• Separate PLC control mounted in a control panel for wall mount or functional description for integration in a separate PLC.
Hazardous Location Options:
• ATEX 3D/2D (outside/inside)
Note: The receiver is designed for handling bulk materials with a Minimum Ignition Energy (MIE) above 10 mJ.Download Product Specification Sheets
Bag dump station with glove box
Didn’t find what you were looking for?
-
• Mounting flange, incl. clamp and seal (to fit Coperion K-Tron modular feeder, bottom pickup port or DN 150 discharge valve).
• Material of construction stainless steel 1.4404 (AISI 316L)
• Internal welds polished flush to a Ra 0.8
• External welds continuous, untreated
• Surface finish electropolished, internal and external
• Stainless steel band clamps
• Seal materials FDA approved
• Clamp seals clear silicone
• Front window: polycarbonate
• Gloves: latex (alternatives listed under options)
• Fastening ring for gloves: PE white
• Air supply filter: PET textile
• Sliding hatch: PTFE
• Primary filter: 6 polyester filter cartridges; filter area 3 m2 [32.3 ft2];filter class F9, incl. automatic reverse jet filter and air reservoir• Secondary filter: freestanding, stainless steel, HEPA class 12, cleaning not included
• Fan: volume approx. 200 m3/hr [7063 ft3/hr]
• Exhaust piping: DN 150 with Morris type clamps
• Automatic breaker (vent) valve: Butterfly valve DN 150 incl. filter
• Bleeding valve: T-joint with a manually adjustable valve, covered by a filter
• Ducting included to place the secondary filter and fan within a radius of 8 m (26 ft) of the Bag Dump Station Standard Electrical Specifications
• Signal voltage 24 VDC.
• Fan motor 3 x 400 V, 50 Hz, output approx. 0.55 kW Weight
• Feed Bin with Glovebox without piping and fan: approx. 130 kg [286 lb] Operating Temperature
• -10 to 50°C (14 to 122°F) for internal use only - not suitable for outdoor useDownload Product Specification Sheets
Bag dump station with glove box
Didn’t find what you were looking for?
-
Mechanical
• PTFE coated filter
• Gloves in neoprene, hypalon or butyl rubber
• Flow aids:
• Vibrator in cone as flow aid
• Fluidizing cone (PORVAIR)
• Aeration pads• Discharge device: screw feeder, bottom pickup port, valve
• Material certificate EN10204-2.2 and EN 10204-3.1
• Surface finish internal Ra. 0.4, external Ra 0.8 Electrical
• Level sensor (capacitive or vibrating fork)
• PLC control cabinet for wall mounting
• Functional design spec for client’s PLC programmingDownload Product Specification Sheets
Bag dump station with glove box
Didn’t find what you were looking for?
-
Bag Dump Station with Glovebox shown with optional bottom pickup port and secondary filter, supplying bulk material to a vacuum sequencing receiver, which is, in turn, refilling a loss-in-weight screw feeder.
Download Product Specification Sheets
Bag dump station with glove box
Didn’t find what you were looking for?
The central exhaust ventilation is always on during use to ensure that dust does not exit the unit during loading and/or discharging. The fan is started automatically when the sliding hatch is opened and generates a slight vacuum. Once the hatch is closed the breaker (vent) valve in the exhaust line is activated, blowing a stream of air over the front window to ensure dust does not settle on the window.
The primary filter is only cleaned when the hatch is closed, and the exhaust fan is on. A protective panel prevents dust from being blown at the front window. The empty bag can be disposed of through a flange at the side of the unit.
Download Product Specification Sheets
Bag dump station with glove box
Didn’t find what you were looking for?
Address : No.69 Yong Hong Road Hongqiao Green Valley Plaza Block G 4th Floor Room 4065/4131 Minhang District Shanghai 201106
版权所有 © 2025 上海携科机电设备系统工程有限公司
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： 上海携科机电设备系统工程有限公司
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry,no matching items were found.
CSS / JS 文件放置地