概况介绍
Side Access Filter Receiver
The Side Access Filter Receiver provides material-from-air-separation in vacuum or pressure conveying of products in pellet, granular and powder form. It is often used when side access to filters is important for allowing maintenance personnel to replace the filters without having to enter the product area and height restrictions do not allow the use of top load filters.
- Design
- Technical Data
- Options
- Model Specifications
- Dimensions
-
- 商品名称: Side Access Filter Receiver
- 商品编号: 1440651002959777792
The Side Access Filter Receiver provides material-from-air-separation in vacuum or pressure conveying of products in pellet, granular and powder form. It is often used when side access to filters is important for allowing maintenance personnel to replace the filters without having to enter the product area and height restrictions do not allow the use of top load filters.
The unit’s filter element is cleaned by reverse jet cleaning from a compressed air accumulator. The air is directed through venturis, inducing a greater volume of air to clean the filter element for more complete dust particle dislodging. Sets of filter elements are pulsed at a time, leaving the remaining filter elements on-line. The interval between pulsing is adjustable to ensure optimal filter element cleaning. Material entering the unit is filtered by a cleanable, spunbond substrate polyester with an FDA approved ePTFE membrane. Available in both carbon steel and stainless steel materials of construction.
Features
• Low overall height compared to top load filters
• Replace the filters without entering the product area
• Unique top material inlet on the receiver reduces can velocityconcerns
• Steep hopper slope helps promote material flow of hard to handle materials
Controls
• The air pulse cleaning of the filter elements is regulated by the timer control panel. The timer controls the remote pilot valves and allows easy adjustment of the frequency and duration of each pulse.Download Product Specification Sheets
Video：Side Access Filter Receiver
Got more questions?
-
Standard Mechanical Specifications
• Sizes 813 mm [32 in], 1067 mm [42 in] and 1219 mm [48 in] diameter
• Material of construction:
• Carbon steel construction, non-contact surfaces painted RAL 7035 gray
• Stainless steel DIN 1.4301 [AISI 304] material contact construction, welds polished to 1.6 μm Ra surface on the interior and 6.3 μm Ra on the exterior, non-contact surfaces painted RAL 7035 gray
• Filter housing with 70° hopper and 254 mm [10 in] ANSI drilled flanged discharge
• Material tube inlet and exhaust diameter: 102 mm [4 in] on 32 in. model and 152 mm [6 in] on 42 in. & 48 in. models
• Helix tube filter cartridges are 100% spunbond polyester with ePTFE
• 813 mm [32 in] unit: 5.1 m2 [55.2 ft2] total filter area
• 1067 mm [42 in] unit: 8.5 m2 [92 ft2] total filter area
• 1219 mm [48 in] unit: 17.1 m2 [184 ft2] total filter area
• Mounting brackets
• Threaded coupler for level control
• No-tool access door with ergonomic handlesOperating Temperature
• Ambient limits -20 to 80°C [-4 to176°F]
• Product max. limit 121°C [250°F]
Operating Pressure
• Housing limits 69 mbar(g) [1 psi(g)] pressure to 541 mbar(g) [16 in Hg] vacuum
Standard Electrical Specifications
• Cleaning timer control panel with IP66, NEMA 4 die cast aluminum enclosure and 24 VDC operation
• Remote pilot valve panel with IP67, NEMA 4 die cast aluminum 4 enclosure and 24 VDC 15 W coils
Weights
• 813 mm [32 in] unit: 286 kg [630 lb]
• 1067 mm [42 in] unit: 420 kg [925 lb]
• 1219 mm [48 in] unit: 640 kg [1410 lb]Download Product Specification Sheets
Video：Side Access Filter Receiver
Got more questions?
-
Mechanical Options
• Various materials of construction and weld finishes available upon request
• Various discharge arrangements
• Oleophobic filter media
Electrical Options
• 120 VACHazardous Location Options
• Explosion-proof NEMA 7 or 9 construction
• Explosion venting or suppression
• NEC - Class I, Div. 1, Groups C & D,
• NEC - Class II, Div. 1, Groups E, F & G
Accessories
• Support stand and service platform
• Level switch (for hopper level)
• Pressure differential indicator
• Flow aidsDownload Product Specification Sheets
Video：Side Access Filter Receiver
Got more questions?
-
Download Product Specification Sheets
Video：Side Access Filter Receiver
Got more questions?
-
Video：Side Access Filter Receiver
Got more questions?
The unit’s filter element is cleaned by reverse jet cleaning from a compressed air accumulator. The air is directed through venturis, inducing a greater volume of air to clean the filter element for more complete dust particle dislodging. Sets of filter elements are pulsed at a time, leaving the remaining filter elements on-line. The interval between pulsing is adjustable to ensure optimal filter element cleaning. Material entering the unit is filtered by a cleanable, spunbond substrate polyester with an FDA approved ePTFE membrane. Available in both carbon steel and stainless steel materials of construction.
Features
• Low overall height compared to top load filters
• Replace the filters without entering the product area
• Unique top material inlet on the receiver reduces can velocityconcerns
• Steep hopper slope helps promote material flow of hard to handle materials
Controls
• The air pulse cleaning of the filter elements is regulated by the timer control panel. The timer controls the remote pilot valves and allows easy adjustment of the frequency and duration of each pulse.
Download Product Specification Sheets
Video：Side Access Filter Receiver
Got more questions?
Address : No.69 Yong Hong Road Hongqiao Green Valley Plaza Block G 4th Floor Room 4065/4131 Minhang District Shanghai 201106
版权所有 © 2025 上海携科机电设备系统工程有限公司
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： 上海携科机电设备系统工程有限公司
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry,no matching items were found.
CSS / JS 文件放置地