概况介绍
P10 Venturi Loader
The P-Series Venturi loader is designed to convey powders and meets the rigid 3A Dairy sanitary requirements. With the choice of various discharge valve types (powered flap and active driven butterfly valves) the P-Series Venturi loader can be used for conveying applications such as hopper loading, as well as lossin-weight feeder refill applications, where the loader is not always emptied completely. The venturi power unit utilizes compressed air to create a vacuum convey source.
- 产品描述
- Conveying Rates
- Technical Data
- Options
- Dimensions
-
- 商品名称: P10 Venturi Loader
- 商品编号: 1440650967673098240
The P-Series Venturi loader is designed to convey powders and meets the rigid 3A Dairy sanitary requirements. With the choice of various discharge valve types (powered flap and active driven butterfly valves) the P-Series Venturi loader can be used for conveying applications such as hopper loading, as well as lossin-weight feeder refill applications, where the loader is not always emptied completely. The venturi power unit utilizes compressed air to create a vacuum convey source.
The P10 loader is available in two outlet configurations: powered flap valve (FP) or butterfly valve (BV). The loader body is made of stainless-steel DIN 1.4404 [AISI 316L], with internal and external electropolished surface passivation. The modular construction and sanitary design without pockets or dead spaces allow for easy disassembly and cleaning as well as simple expansion with extension modules. Tri-Clover quick-release fittings ensure quick disconnection from conveying and vacuum (air) lines. All units have reverse jet filter cleaning.
Mechanical Features
• Enclosed venturi power unit
• Sanitary design for easy cleaning
• Rugged modular design
• Steep cone angles ensure excellent discharge
• Large area reverse jet filter for efficient powder conveying
Controls
The P10 venturi loader is equipped with the LSR Controller. Front panel controls include a potentiometer to set the draw time and an on/off switch. The controls are capable of handling future add-on options, such as hopper high-level probes. The control is provided by a 15 amp, 115/230 VAC, single-phase, grounded panel.Download Product Specification Sheets
Video：P10 Venturi Loader
Can’t find what you’re looking for?
-
P10-FP-150 flap valve versions Φ 150 mm [6 in] up to 300 kg/h [660 lb/h]
P10-BV-100/150 butterfly valve versions Φ 100 or 150 mm [4 or 6 in] up to 300 kg/h [660 lb/h]
Based on a distance of 6 m [20 ft] and bulk density of 0.5 kg/dm3 [31 lb/ft3]. Rates vary with material characteristics, conveying distance, and plant layout.Download Product Specification Sheets
Video：P10 Venturi Loader
Can’t find what you’re looking for?
-
Standard Mechanical Specifications
• Stainless steel DIN 1.4404 [AISI 316L] for material contact parts
• Venturi supply air: 6 bar [90 PSI] and 1 m3/min [35 ft3/min] required
• Venturi air consumption: 53 m3/h @ 6 bar(g) [31 scfm @90 psi(g)]
• Stainless steel enclosure for venturi power unit
• Surface finish electropolished
• Welds continuous as laid
• Holding capacity: P10-FP-150 9.5 dm3 [0.34 ft3],P10-BV-100/150 7.3 dm3 [0.26 ft3]
• Stainless steel band clamps
• Sealing and gaskets, FDA listed food grade materials:
Clamp ring: silicone, translucent
Tri-clamp: white silicone, FDA approved
Flap valve: flap bonded silicone sheet, translucent
Butterfly valve rubber sleeve: EPDM, black
• Convey line connection; spigots with Tri-clamps, 38.1 mm [1.5 in],50.8 mm [2 in]
• Discharge valve: Butterfly valve, ? DN 100 or 150 [4 or 6 in] Power flap, ? 150 mm [6 in]
• 100% spunbond polyester pleated cartridge filter with stainless steel end caps 1 filter, total 0.25 m2 [2.7 ft2]; length 200 mm [7.9 in]
• Automatic reverse jet filter 2 dm3 [0.07 ft3] SS air reservoir; maximum 4 bar(g) [60 psi(g)]
• Material certificate EN 10204-2.1Standard Electrical Specifications
• Signal voltage 24 VDC
• Supply power for LSR: 115/230 VAC, 15 Amp, auto switching
Weights
• The approximate weights are:
P10-BV-100-VE 44 kg
P10-BV-150-VE 46 kg
P10-FP-150-VE 41 kg
Operating Temperature
• -10 to 50°C [14 to 122° F] for indoor use only - not suitable for outdoor useDownload Product Specification Sheets
Video：P10 Venturi Loader
Can’t find what you’re looking for?
-
Download Product Specification Sheets
Video：P10 Venturi Loader
Can’t find what you’re looking for?
-
Mechanical
• 6 dm3 [0.2 ft3] extension module
• Slide gate valves as alternative for butterfly type
• PTFE coated filter media
• Open pleated filter type for PTFE execution
• Filter basket with GORE-TEX? cloth
• EPDM white rubber sleeve for butterfly valve
• Vibrator as discharge aid
• Aeration pads as discharge aid
• Stainless steel enclosure for solenoids and pressure regulators supplied loose
• Material certificates type EN10204- 2.2 and EN 10204-3.1Electrical
• Level probes (capacitive or tuning fork type)
• Terminal box mounted, painted aluminum or stainless steel finish
• CSA or UL certified solenoids
Hazardous Locations
• NEC Contact factory
• ATEX (outside/inside/discharge)
• with power flap: 3D / 1D / 2D
• with butterfly valve: 3D / 1D / 1D
EU-Type Examination Certificate SEV 17 ATEX 0149 XDownload Product Specification Sheets
Video：P10 Venturi Loader
Can’t find what you’re looking for?
The P10 loader is available in two outlet configurations: powered flap valve (FP) or butterfly valve (BV). The loader body is made of stainless-steel DIN 1.4404 [AISI 316L], with internal and external electropolished surface passivation. The modular construction and sanitary design without pockets or dead spaces allow for easy disassembly and cleaning as well as simple expansion with extension modules. Tri-Clover quick-release fittings ensure quick disconnection from conveying and vacuum (air) lines. All units have reverse jet filter cleaning.
Mechanical Features
• Enclosed venturi power unit
• Sanitary design for easy cleaning
• Rugged modular design
• Steep cone angles ensure excellent discharge
• Large area reverse jet filter for efficient powder conveying
Controls
The P10 venturi loader is equipped with the LSR Controller. Front panel controls include a potentiometer to set the draw time and an on/off switch. The controls are capable of handling future add-on options, such as hopper high-level probes. The control is provided by a 15 amp, 115/230 VAC, single-phase, grounded panel.
Download Product Specification Sheets
Video：P10 Venturi Loader
Can’t find what you’re looking for?
上一页
上一页
下一页
Address : No.69 Yong Hong Road Hongqiao Green Valley Plaza Block G 4th Floor Room 4065/4131 Minhang District Shanghai 201106
版权所有 © 2025 上海携科机电设备系统工程有限公司
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： 上海携科机电设备系统工程有限公司
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry,no matching items were found.
CSS / JS 文件放置地